The different reasons for your car not to start are not always obvious. This article discusses ways that a Morris Park locksmith would be able to help you when you find your car won’t start.  The common issues could be with the keys or the ignition cylinders. And to deal with these issues, you may need the services of the Locksmiths to turn over your car.

Troubleshooting When Your Car Fails to Start

If after doing the basic troubleshooting you are unable to make the car move, you can navigate the various issues that you might be facing and find the right solutions for them. Some common issues could be a dead car battery, the engine having some vapor lock, etc. However, this article discusses issues that require the services of a Morris Park locksmith from  for their solutions.

Instances Where the Services of a Locksmith is Required

A Worn Car Key

Over the passage of time, there are chances of the car key getting worn down. This issue is not always considered and it becomes difficult to troubleshoot unless a sparely used key is used. Make use of a spare key and find out if the car turns over. If the spare key used is relatively unused, and still, the car does not start, it is a proof that the issue is not with a worn out key. The reason for a worn key not functional is due to change in shapes and depths of the grooves as a result of repeated use. The solution to this issue lies in replacing the key. The key could be made by a key cutter that a locksmith uses to make a new key by code.

Ignition Switch Issues

A common problem for a car not to start is its ignition switch. Often this problem is mistakenly taken as an issue with the car battery. To find the right cause, you can use your headlights and find out if a faulty ignition switch is a reason behind the car not starting.  Without the car is on and without inserting the proper keys, it is possible to switch on the headlight. If the lights are on, though the dashboard lights are not, it is a good proof of the battery working fine.

Source: Google Image Search

Either the full ignition switch needs to be replaced, or else an issue with wiring is there for the car not to start. For proper working, there should be a connection between the ignition switch and the battery. Often due to manufacturing errors, these connections get severed. There could be additional issues cropping up if the ignition switch is replaced after changing the battery.

Ignition Cylinder Problems

If the key does not turn a car but works for door locks and not the ignition cylinder, it is certainly not an issue with the ignition switch, but there are chances of a worn out ignition cylinder. If there are many keys to an old car, there are good chances of the ignition cylinder requiring replacement. Chances are there of the key wearing out quicker compared with the cylinder, though the cylinder could also wear down.

To rescue your existing ignition cylinder, you could rekey the ignition. This will lower the costs that you would otherwise have to bear in cutting keys, programming new keys and even door lock cylinders replacement. It would make sense to hire the services of a professional to assess your car’s conditions because issues concerning ignition cylinders can actually be due to key problems. The possible problems could be sending wrong or no signals by the car key to the car’s computer. It is only an experienced eye that can detect the reason for the car not to start.

Invalid Signaling

Some cars are available that makes the existing keys invalidated as soon as the battery is changed. Some issues could come up if new keys are made, which is usually found in aftermarket electronic car keys. Electronic keys and transponder chips could get damaged without any signs of them not working. If you own a new car key recently, it may not be known to have a transponder key programming. All these factors could affect how the car key is sending a signal to the car’s computer or the transceiver of the car.

The best solution for all these various types of issues is to find a reliable Morris Park locksmith  service provider like One Stop Locksmith specializing in auto locksmith services. They should have knowledge of using programming and key cutting machines and also be able to access the diagnostic port of the car to work with the onboard computer.  The process involved is more complex compared to duplicating car keys.

Key Fob Battery Dead

With modern cars, a common issue that is found is the car failing to start when the ignition button is pressed on a keyless start system. The likely issue could be with the battery in the key fob, and all that is needed is to change the battery and make it work again. If no spare car key is available, or else there is no battery replacement, it is really going to be a hard time.

Conclusion

There are many good reasons for a car failing to start. You have come to know few of these things that when investigated would help to solve the issue at hand and get your car moving again. If you find fixing ignition or car key problems difficult, you need to get the services of professional Morris Park locksmith.